COMBINATION LATHE MILLING MACHINE WBP290F
High-capacity bench-top combination machine
Excellent precision and rigidity
Large-diameter chuck, high bed clearance
Double-prism bed ground, HF-hardened to 52-55HRC
Electronically adjustable spindle speed
Digital display of rotation frequency
Feed and threading box in sealed housing
Automatic feeds on 2 axes
Independent turning bar
Mechanical reverser (oil-bath balancer) for left-hand threads
Eccentric headstock clamping
Adjustable backlash on 3 slides
Independent milling head control
Fine micrometric downfeed with digital spindle position display
Head can be tilted +/-90
Automatic milling feed possible
Non-contractual photos
TECHNICAL DOCUMENTATION
TECHNICAL VIDEO
Play video
4 286,00€ HT
Frequently asked questions.
What's the difference between "induction motor - gearbox - brushless motor - inverter"?
What are the standards for mounting chucks on Weiss lathe spindles?
What are the standards for mounting chucks on Weiss lathe spindles?
Description
| Trade name | WBP290F | ||||
| Reference Weiss | 10110316 | ||||
| Distance between spindles | 750mm | ||||
| Max. bench passage diameter | 290mm | ||||
| Max. passage diameter on cross slide | 170mm | ||||
| Bench width | 180mm | ||||
| Spindle cone | CM5 | ||||
| Spindle speed adjustment | Variable via potentiometer | ||||
| Speed range | 50-1800rpm | ||||
| Range of transverse feed speeds | 0.02-0.28mm/rev | ||||
| Longitudinal feed speed range | 0.07-0.40mm/rev | ||||
| Withworth thread range | 8-56 threads per inch | ||||
| Metric thread range | 0.2-3.5mm | ||||
| Upper carriage travel | 50mm | ||||
| Cross slide travel | 140mm | ||||
| Tailstock sleeve travel | 80mm | ||||
| Tailstock sleeve cone | CM3 | ||||
| Motor and voltage | 1500W (2HP) - 230V single-phase | ||||
| Drilling/milling head | |||||
| Max. drilling capacity | 25mm | ||||
| Maximum grooving capacity | 16mm | ||||
| Maximum surfacing capacity | 63mm | ||||
| Spindle nose | CM3 | ||||
| Spindle stroke | 50mm | ||||
| Speed range | 50-2500rpm | ||||
| Max. spindle-table distance | 320mm | ||||
| Head tilt L & R | ±90° | ||||
| Motor and voltage | 1100W - 230V single-phase | ||||
STANDARD EQUIPMENT:
- 3-jaw chuck Ø160mm (M1 and M2 jaws)
- Camlock D1-A4 spindle nose
- 4-position turret
- 0.5-13mm key drill chuck
- Dry points
- Servo chuck protector
- Rear splash guard
- Watch to fall back in step
- Disengageable drag stop
- Chip collection tray
- Set of gears for threads and feeds
- Swarf and cutting oil drip tray
- Technical documentation
Further information
| Weight | 240 kg |
|---|---|
| Dimensions | 1400 × 780 × 1070 mm |
| Technical configuration | Standard, Visu3axes |
Customers who bought this product also purchased
You may also like...
-
-
- Accessories
7-TOOL TURNING SET H12
- 113,00€ HT
- Add to basket
-
-
-
- Accessories
ROTATING TIP CM3
- 57,00€ HT
- Add to basket
-
-
-
- Accessories
FIXED BEZEL TOUR 290
- 48,00€ HT
- Add to basket
-
-
-
- Accessories
BRIDGE PLATE Ø240mm
- 47,00€ HT
- Add to basket
-
Opinions
There are currently no product reviews.