Description
TECHNICAL DATA
Trade name | WBL1835 | ||||||||||
Weiss reference | 10103083 | ||||||||||
Distance between centers | 350mm | ||||||||||
Maximum turning diameter on the bed | Ø180mm | ||||||||||
Maximum turning diameter on cross slide | Ø110mm | ||||||||||
Bed width | 82mm | ||||||||||
MT spindle nose | MT3 | ||||||||||
Spindle speed adjustment | Variable via potentiometer | ||||||||||
Spindle bore | Ø20mm | ||||||||||
Speed range | 50-2250rpm | ||||||||||
Range of feed speeds | NC | ||||||||||
Withworth threads range | 12-52 threads per inch | ||||||||||
Metric threads range | 0.5-2.5mm | ||||||||||
Tool post travel | 55mm | ||||||||||
Cross slide travel | 65mm | ||||||||||
Tailstock sleeve stroke | 60mm | ||||||||||
Taper of tailstock sleeve | MT2 | ||||||||||
Motor and voltage | 550W - 230V single-phase |
STANDARD EQUIPMENT
- 3-jaw chuck Ø100mm (M1 and M2 jaws)
- Dry nibs
- Set of gears for threads and feeds (steel)
- Chip and cutting oil drip tray
- Technical documentation
Notice
There are no reviews yet.